Watch Your Rotating Equipment
Rotating equipment can slip or slow down. This causes damage. Our speed monitoring switch watches the speed. It uses a non-contact sensor. It checks the speed of the drive shaft or the driven wheel. You can set the range from 0.1m/s to 9.9m/s. Or you can set it by RPM. The sensing distance is 10 to 20mm. It has a start delay of 0 to 60 seconds. This stops false alarms when the machine starts. It works with AC 220V or DC 24V power.
product comparison bg model
|
Parameter |
Value |
|
Speed Range |
0.1m/s - 9.9m/s (or RPM setting) |
|
Sensing Distance |
10 - 20mm |
|
Start Delay |
0 - 60 seconds (adjustable) |
|
Operating Voltage |
AC 220V or DC 24V |
Smart Protection from 38 Years of Experience
We have 38 years of experience. Our speed monitoring switch is made with smart technology. We have a strong R&D team in Shanghai. We can add special features. We follow strict quality rules. We test each unit carefully. You can trust it to protect your equipment.
Custom for Your System
Do you need a special output? We offer custom services for our speed monitoring switch. We can add a 4-20mA analog output. We can add Modbus communication. Our team can help you choose the right setup. We have good payment terms. We want to be your partner.
Hot Tags: longitudinal tear detector switch, China longitudinal tear detector switch manufacturers, factory
